Top 5 Things Pool Owners in Texas Need to Know
Residents in the Kingwood area know that Texas pools take time-consuming care and maintenance in order to keep a clean pool. Hot Texas temperatures that can fluctuate in the evenings and the dry air are just a couple of factors that can quickly cause chemical imbalances, leading to bigger issues. Here are 5 tips for Texas pool owners to maintain your Texas pool in great condition.
1. Tanning lotion and sprays clog the filter system
Almost every commercial aquatic facility has a sign “Shower before entering the water.” This is to help limit the amount of oil introduce to the swimming pool. Oil and water don’t mix. A solution to help in breaking down the oils in the pool is the regular use of Enzymes. This will help prolong the filter life as well.
2. Heaters need protection
Many pools in Texas are equipped with either gas heaters or heat pumps for the cooler months. Either system needs to be protected from metal staining that can occur as water circulates through the internal heater components. A metal sequestrant can be used weekly to prevent and metals from staining your pool surface.
3. There is more to water chemistry than Chlorine and pH
Calcium Hardness is a key measurable component in a well balanced pool. The performance of calcium can fluctuate greatly with warmer/cooler water swings and pH. Scaling can occur when Calcium Hardness is too high. This could result in cloudy water, rough surfaces, and heater inefficiency. Corrosive water can occur when calcium hardness is too low. You may notice etching of plaster, grout dissolving or pitting of concrete surfaces.
4. Test your source water
With the high temperatures in Texas and sometimes cooler nights, your pool is more likely to evaporate at a fast rate. Be prepared to know the quality of the water that you refill the pool with. Knowing the new chemistry that you’re adding to the pool may save you on balancing chemicals. If adding water from the tap has a lower pH than the pool’s water, then you can reduce the amount of pH minus you would use to ensure a balanced pool.
5. Prepare for cooler weather
Towards the end of the year, it is important to maintain proper filtration time and Chlorine levels. Most of the pools in Texas will stay warm enough to promote algae growth. If your pool has a chlorine feeder or salt system, Chlorine is only produced when the pump is running. Be sure to adjust your time clocks and automation to the proper run time for sanitizing.
Still have questions about maintaining and caring for your Texas pool? Give Pool Scouts of Kingwood a call at 281-800-1484 and we can answer any of your questions. We look forward to hearing from you!